Meter Tubes

FMC provides adequate upstream and downstream pipe lengths required to achieve optimum flow profile.
The lengths are determined by AGA 3 or ISO 5167 - normally 17D Upstream (AGA 3) and 18D (ISO 5167) and 5D Downstream for Orifice meters.

Meter Tubes can be supplied with Flow Streightener (Accessories) and CPA Flow Profiler.
Different configurations apply depending on location of tees, elbows, bends, valves elsewhere in upstream piping.
Flow Conditioners can be used to improve flow profile in difficult or more complex piping configurations.